Available with us are 'Floredo' – turbine sensor & meter combos that are specially designed for general purpose metering requirements. These battery operated turbine sensor & meter combos are housed in robust & compact plastic body to provide an ergonomic look. These combo meters have set new standards for the flow measurement technology by generating frequency & signal proportional to the flow. These standard meters with 1" BSP male threading at both the ends (inlet & outlet) are provided with digital readout of the flow rate for accuracy in output.

Following are the technical specifications of these turbine sensor & meter combos:

• Function: Rate indication (cumulative / total count)

• Power supply: Built in 3.6 V lithium battery (auto off 1 min)

• Display: 7 digit LCD

• Accuracy: 2%

• Linearity: 0.5%

• Calibration: Using front panel membrane keys

• Protection rating: IP65

• Unit dimensions: 90mm X 90mm X 70mm

• Temperature: max 50°C

• Option of display: Flow rate- LPM, LPH, M3/Hr

• Total flow: Liters, M3, gallon

• Flow range: 400 to 5000 LPH (for water at room temperature)

• Mounting: Vertical or horizontal

• End connection: 1 "BSP male threading

• Battery life: 1.5 years @ 25°C continuous use; 7 years @ sleep mode

We bring forth for our clients, a technology based range of 'FloCounter' – paddle wheel sensor & meter & fitting combo that is reckoned for compact design. Field mounted or panel mounted, these easy to fit flow meter solutions are programmable and are offered with saddle mounting option or standard plastic fittings. We offer these combos in two models i.e. FloCounter: AC (70V to 270V SMPS) and FloCounter+ (Battery operated through 2 x 1.5V duracell batteries)

The details of these paddle wheel sensor & meter & fitting combos are mentioned below:

Salient Features

Easy to install & maintain Mounting: Vertical or Horizontal and Field or panel No Fear of Glass breakage as in rotameters No Fear of visibility loss Provided with solvent T or clamp on saddle

Technical Specifications

Function: Rate indication, cumulative/total count Accuracy: +/-2% of F. S. D Meter dimensions: 111 x106x68mm Display: 7 Digit LCD Mounting: On line type vertical or horizontal Installation: Solventable T or clamp-on saddle Protection: Weatherproof enclosure Programming: Through front panel keys Power Supply: Universal 70V AC to 270V AC SMPS 2x1.5VDC, Duracell AA size (for FloCounter+) Operating pressure: 5 KG/Sq. Cm Operating temp: 0 to 55 °C Standard fittings: (1/2", 1", 1 ½ ') T; (2", 2 ½ ', 3", 4") saddle

We present to our clients, a wide range of 'FT 10' - turbine flow sensor & temperature sensor combos that are suitable for measuring the flow rate & total and the temperature of the media. Efficient in terms of energy consumption, these convenient combo units are enclosed in a plastic body that is sturdy as well as durable.

Below mentioned are the technical specifications of our turbine flow sensor & temperature sensor combo:

Flow	Measuring range: 2 to 40 l/min Accuracy, 0 to 100 °C: ±1.5%FS Response time (63.2 %): < 1 s Resolution: 0.2 l/min
Temperature	Measuring range: 0 to 100 °C Accuracy, 25 to 80°C: ±1 °C Accuracy, 0 to 100°C :±2 °C Response time: < 1 s Resolution: 0.5 °C
Media and environment	Media types: The sensor is compatible with liquids (kinematic viscosity < 2 mm2/s) Media temperature (operation): 0 to 100 °C Ambient air temp. (operation) : -25 to 60 °C System burst pressure: > 16 bar
Electrical data	Power supply: 5VDC (±5 %) Output signals: Ratiometric Flow signal: 0.5-3.5V(Zeroat0.35 V) Temperature signal: 0.5-3.5V Power consumption: < 50 mW Load impedance: > 10 kQ
Material of construction	Sensing element: Silicon-based MEMS sensor Seal (sensor to housing): EPDM rubber
Dimensions	Sensing element: 47 x 40 x 20 mm